Elevator cabin overload control device LC-MV59X
Elevator ANT LC-MV59X cylindrical hall effect proximity magnetic sensor switch elevator load weighing device
Description:
This electronic elevator load testing device LC-MV59X/LC-58S is applicable to all elevators with movable car platform in need of overload signals. This device is of extremely high performance-price ratio. This appliance is to overcome the inherent disadvantage of the mechanical overload switch and to replace it, an it is planetary load measuring system for elevator &lift overload protection because of cheap price and easy installation and maintenance.
Features:
No-contact induction operate mode, without mechanical movements, directly installed in the position of original overload switches or car frame beam and so on, without changing elevators'structure;
Applying high-tensile induced magnet, maximally improving anti-interference ability of the system;
Electric property conforms to the standard of "International Electric Community";
Accurate in localization, small in volume, and convenient in installation and debugging. Simple in structure, cheap in price.
Compact size and high performance ratio, easy installation.
Working Principle:
This elevator&lift overload control system LC-MV59X/LC58S weighs the elevator car load based on the principle of the elastic deformation of movable elevator car platform caused by loading with the hall effect switch sensor measuring the change of displacement, fulfilling the aim of load weighing, and it is fast and accurate.
| Model |
LC-MV59X(Cylindrical) |
LC-58C(rectangle) |
| Sensing distance |
2-9mm±15% |
2-9mm±10% |
| Differential travel |
15% max.of sensing distance |
10% max.of sensing distance |
| sensing object |
Magnetism Metal |
Magnetism Metal |
| Response speed |
0.2KHz |
0.2KHz |
| Power supply voltage |
12V~24VDC |
12V~30VDC |
| Control output |
Relay output (1NC,1NO) |
Relay output (1NC,1NO) |
| Indicator |
Red LED (Signal output) |
Red LED (Signal output), Green LED (Power) |
| Temperature influence |
-10~70ºC,Max. Of sensing distance at 23ºC in the temperature rang±5% |
| Voltage influence |
±2.5% max. Of sensing distance in the rated voltage range±10% |
| Insulation resistance |
50MΩ |
| Dielectric strength |
500VAC at 50/60Hz for 1 min |
| Connection method |
Pre-wire models(standard length 1.2m) |
Instllation&Wiring Diagram
Install under the elevator bottom floor
LS-58S WDS-MR200 OMS-710S
WE UTEC could provide a wide range of elevator Load Weighing Control device system for versatile installation postion. methods like rope hitch installation, under car platform installation, crossbeam installation, clamping on traction rope installation in order to offer a safe and comfortable elevator running status.
Broad selection: Load weighing system in any location of elevator, Using SUMMIT solutions loads can be weighed in every imaginable situation.We offer you flexible, modular solutions for both requirements, and wide experience with modernization projects. we attention to detail in the design of their modular system allows great freedom to configure load weighing systems to suit all types of cabin.
Universal device for working with different load cells:
- Under Elevator cabin floors:UC-AP-OMS-560
- Clamping on wire rope:WDS series, RH-SM-OMS-820
- Machine bed frane:RHP-X-OMS-560
- Between the wire rope hitch plate:RHP-E-OMS-520
A solution providing very precise load weighing way, and Under cab sensors are not recommended for modernization. Simple solutions for modernization with no impact on the existing regulated travel parameters Very simple installation with no mechanical modification Cost-effective load weighing with a single sensor which can be scaled for a precise result
){kind=link}