ANT UC-H 1200kg 3000kg alloy steel elevator car bottom load weighing sensor under lift cabin floor chassis
UC-H(B) with squeeze head UC-Hwithout squeez head
Description:
The installation of the load weighing sensor UC-H series is made normally for new installations, given the complexity of its positioning. Although it is the most complex to install, it is the most precise,since we make a scale of the cabin, where there is no influence of external mechanical agents, as the guides or the compensation chain. This cabin compression over Load cell UC-H comes with Anti vibration rubber pad mounting & this provides Dampening effect. And if the anti vibration rubber(squeeze head) is removed, it is a good way to install at the wire rope attachment or between the wire rope hitch plates, and it is more flexible, and can meed requests for different installation position.
Features:
- Compression Load cell specially designed for the Installation under cabin
- (placed in the center)
- quipped with silent-block pad to avoid the transfer of vibrations.
- It can be connected to any unit control on the Series OMS-560,OMS-520,OMS-820, except OMS-620S and OMS-920S
- Under cab sensors are not recommended for modernization
- Various installation installation
- Perfect for new installations
- Load cell for installation under elevator cabin.
- Mounted on a silent-block pad that avoids the transfer of vibrations .
- Adjustable locking screw to adjust the unevenness of the bottom of the car during assembly
| Model |
UC-H(B) with squeeze head |
UC-H |
| Rated Load |
1200kg/3000kg |
1200kg/3000kg |
| Sensitivity |
2.0+-0.02%mv/v |
2.0+-0.02%mv/v |
| Total error |
+/-0.5% F.S |
+/-0.5% F.S |
| Excitation |
5-12V DC |
5-12V DC |
| Creep Error |
+/-0.02% F.S |
+/-0.02% F.S |
| Insulation Impedance |
≥5000 Ohm |
≥5000 Ohm |
| T C SPAN |
+/-0.02% F.S./10ºC |
+/-0.02% F.S./10 ºC |
| Operation temperature range |
-30 to 70 degree Celsius |
-30 to 70 degree Celsius |
| Input Resistance |
760+/-10 ohm |
760+/-10 ohm |
| Output Resistance |
700+/-2 ohm |
700+/-2 ohm |
| Safe Overload |
150% F.S. |
150% F.S. |
| Ultimate Overload |
200% F.S. |
200% F.S. |
| Construction |
Alloy Steel |
Alloy Steel |
| Protection Class |
IP68 |
IP68 |
| Cable Length |
8M |
8M |
Car load cell UC-H size:
Instllation &Wiring Diagram
Mount under the car floor UC-H(B) with rubber head(squeeze head)
Installation options of load sensors on lift
The following installation options are available for the load sensors:
› RHP-X strain link Sensor on car frame
› RH-A Multi rope sensor on car after rope clamps ‚
› RH series load sensor on fixed point of individual rope attachment
› UC-AP sensor on drive frame …
Audited Supplier 
UC-H(B) with squeeze head UC-Hwithout squeez head
){kind=link}