SUMMIT ANT SUMMIT split type mounting under cabin elevator load weighing device OMS-560-UC-AP-B rated 3200kg 6400kg
Elevator Cabin load weighing device UC-AP-B-OMS-520
Description:
Mounting under the elevator car floor:OMS-520-UC-AP-B
The load weighing control system UC-AP-B-OMS-520 is particularly mounted under the elevator cabin floor, and under cab sensors are ideal for new installations. They easily mount under the cab and are extremely accurate. They are self-calibrating and do not require test weights, and the standard set usually includes 4 floor sensor, 1junction box and 1 weighing unit control OMS-520.
A solution providing very precise load weighing way, thanks for this unique feature that setting is completed easily and with few minutes.
PS: Under cab sensors are not recommended for modernization.
Installation notice:
- Mechanical capacity (cabin+load): 3200 kg
- High precision and easy to adjust
- Programming with keys for different weight points
- Independent working full-bridge sensors
- HOLD input: To stop the measuring during the Travel
- Digital display
- The threshold can be programmed
- Isolation material is included(It comes in a silent-block to avoid vibration transmission).
- Automatic adjust to zero
- Ability to install a quantity of 8 groups in parallel via junction box
- Possibility of functioning during failure of a active-cell
- Maximum accuracy load sensor designed for elevators installation under car.
Slipt type elevator load weighint device:
Strain load cell sensor UC-AP-B technical paramters:
| Model |
UC-AP |
UC-AP-B |
UC-AP-C |
| Rated Load |
800kg |
800kg |
800kg |
| Rated Output |
2.0+-0.02%mv/v |
2.0+-0.02%mv/v |
2.0+-0.02%mv/v |
| Total error |
+/-0.5% F.S |
+/-0.5% F.S |
+/-0.5% F.S |
| Repeatability |
+/-0.5% F.S. |
+/-0.5% F.S. |
+/-0.5% F.S. |
| Creep 30min |
+/-0.05% F.S/30min |
+/-0.05% F.S/30min |
+/-0.05% F.S/30min |
| Zero Balance |
+/-1% F.S. |
+/-1% F.S. |
+/-1% F.S. |
| T C SPAN |
+/-0.02% F.S./10 degree Celsius |
+/-0.02% F.S./10 degree Celsius |
+/-0.02% F.S./10 degree Celsius |
| Operation temperature range |
-30 to 70 degree Celsius |
-30 to 70 degree Celsius |
-30 to 70 degree Celsius |
| Input Resistance |
1030+/-10 ohm |
1030+/-10 ohm |
1030+/-10 ohm |
| Output Resistance |
1000M+/-2 ohm |
1000M+/-2 ohm |
1000M+/-2 ohm |
| Safe Overload |
150% F.S. |
150% F.S. |
150% F.S. |
| Ultimate Overload |
200% F.S. |
200% F.S. |
200% F.S. |
| Construction |
Aerometal |
Aerometal |
Aerometal |
| Protection Class |
IP68 |
IP68 |
IP68 |
| Insulation impedance |
≥5000Ω |
≥5000Ω |
≥5000Ω |
| Cable length |
2.5m(black) |
2.5m(grey) |
5m(grey color) |
| Connection type |
USB interface |
Terminal Plug |
Terminal plug |
Elevator load weighing control unit:OMS-520 technical parameters:
| Control Unit:OMS-520 |
| Operation Voltage |
AC/DC18-45V |
| Nominal power |
4W |
| Load Cell Channel |
1 |
| Relay Number |
4(overload,full,half empty load ) |
| Contact Load |
1A125VAC,2A 30VDC,5A 250VAC/5A 30VDC |
| Display Type |
4 digits 0.56 inch LED |
| Display mode |
Weight/percentage |
| Key number |
6 |
| Voltage analog |
-10v-+10v, 0V-10V |
| Current analog |
4mA-20aA |
| Sensor operation voltage |
DC5V |
| Signal Hold Voltage |
AC/DC12-45V |
| Measuring precision |
0.1% |
| Operation temperature |
-45degree-+85degree |
| Size |
90x84x58mm |
| Weight |
265g |
Instllation&Wiring Diagram
Installation&Size:
Wiring diagram :
Connections of 4PCS load sensors Via junction box:
Connections of more load cell sensors with junction box:
LS-58S WDS-MR200 SLO-30V
WE UTEC could provide a wide range of elevator Load Weighing Control device system for versatile installation postion. methods like rope hitch installation, under car platform installation, crossbeam installation, clamping on traction rope installation in order to offer a safe and comfortable elevator running status.
Broad selection: Load weighing system in any location of elevator, Using SUMMIT solutions loads can be weighed in every imaginable situation.We offer you flexible, modular solutions for both requirements, and wide experience with modernization projects. we attention to detail in the design of their modular system allows great freedom to configure load weighing systems to suit all types of cabin.
Universal device for working with different load cells:
- Under Elevator cabin floors:UC-AP-OMS-560
- Clamping on wire rope:WDS series, RH-SM-OMS-820
- Machine bed frane:RHP-X-OMS-560
- Between the wire rope hitch plate:RHP-E-OMS-520
A solution providing very precise load weighing way, and Under cab sensors are not recommended for modernization. Simple solutions for modernization with no impact on the existing regulated travel parameters Very simple installation with no mechanical modification Cost-effective load weighing with a single sensor which can be scaled for a precise result
Audited Supplier 
){kind=link}