Rh-Bc Rated Load 5000kg 10t Clamp on Wire Rope Load Cell Sensor for Crane Hoist Overlad Protection

• Customization: Available
• Pattern: Bridge Type
• Transform Type: Resistance Strain
• Model NO.: RH-BC-5T
• Out-Wire: 4-Wire
• Output Signal Type: Digital Type
• Feature: Corrosion Resistant
• Production Process: Normal Wirewound
• Material: Stainless Steel
• IP Rating: IP67
• Certification: CE
• Customized: Non-Customized
• Production Name: Clamped on Wire Rope Tension Load Sensor
• Suitable for Rope: Dia10-21mm
• Norminal Load: 5000kg
• Appalication: Overload Limiter
• Cable Length: 8m
• Transport Package: Carton+Pallet
• Specification: 10pcs/carton, 22kg
• Trademark: UTE
• Origin: Ningbo China
• HS Code: 8431310090
• Production Capacity: 10PCS/Years

Product Description

Detailed Photos

Clamped on wire rope load cells suitable for wire rope diamater 10-21mm
Rated load from 5T-50T depend on the roping (wire-fall reeving)

Product Description

Description:
The clamped on wire rope load cell RH-BC series is a low cost load cell specially designed to measure the tension force on hoisting and crane rope. Easy installation does not require the hoist to be dismantled nor modified,  and the rope load cell RH-BC clamped on cable load sensor covers a large range of wire rope up to 36 mm in diameter and loads of 5000kg to 10000kg/each rope (under the condition of roping:1:, the lifting capacity depending on the rope reeving falls) Together with a weighing controller (OMS-370C, SUMT-QZX(B),OMS-350) and a digital display scoreboard, this wire rope clamped load sensors constitute a complete measuring system for visualizing and continuously monitoring loads and detecting overloads

Application:
The wire rope load cell sensor is recommended for measuring load and overload to ensure the safety of industrial lifting installations, overhead cranes, winches and hoists. It is perfectly suitable for implementation on existing lifting systems in order to upgrade in compliance with actual safety standards without heavy modification. It is recommend to be used with a control unit (OMS-370C, OMS-350,OMS-160) easily coupled with a digital display scoreboard with 9 digits or 6digitals(red colour)
Note: Due to continual product development, UTE reserves the right to modify specifications without forewarning.
Features:

1. galvanized steel wire (surface preparation, surface treatment:galvanized)
2. Reliable and economical
3. Stainless steel construction galvanized
4. Quick and easy installation
5. Easy to mount directly on fixed point of cable (dead point)
6. IP67 protection class
7. Specially designed for retrofitting in existing crane equipment
8. A wide range of associated products: weighing control unit, LED digital display

 

Product Parameters

Wire rope tension sensor : RH-BC
Rated load	5T/10T	Ultimate overload	200% F.S
Wire rope diameter	12-26mm/22-36mm	Total error	±0.5%F.S
Sensitivity	2.0±0.02%mV/V	Material	Alloy Stell
Excitation voltage	5-12VDC	Cable Length	8/9m
Input impeance	380±20Ω	Creep error	±0.02% F.S.
Output impedance	352±3Ω	TC SPAN	±0.02%F.S/10ºC
Insulation impedance	≥5000MΩ	Working temperature	-30ºC~+70ºC
Safe overload ratio	150%F.S	Protection class	IP67/IP68

Model	Suitable Rope Dia	Capacity	Rated load of each wire rope	L(cm)	H (cm)	B (cm)
RH-BC-5T	Dia10~26mm	5000kg	10000kg	160	35	60
RH-BC-10T	Dia18~36mm	10000kg	20000kg	180	32	70

 

Wiring Diagram

 

                               Clampled on the steel cable                                                      work with controller to compose  the overload  load limiter

Related other items