RH-BC 100000kg 10T 20T Wire Rope force tension measuring load weighing transducer for crane overload protection system
Clamped on wire rope load cells suitable for wire rope diamater 10-36mm
Rated load from 5T-50T depend on the roping (wire-fallS reeving)
Description:
The clamped on wire rope load cell RH-BC series is a low cost load cell specially designed to measure the tension force on hoisting and crane rope. Easy installation does not require the hoist to be dismantled nor modified, and the rope load cell RH-BC clamped on cable load sensor covers a large range of wire rope up to 36 mm in diameter and loads of 5000kg to 10000kg/each rope (under the condition of roping:1:, the lifting capacity depending on the rope reeving falls) Together with a weighing controller (OMS-370C, SUMT-QZX(B),OMS-350) and a digital display scoreboard, this wire rope clamped load sensors constitute a complete measuring system for visualizing and continuously monitoring loads and detecting overloads
Application:
The wire rope load cell sensor is recommended for measuring load and overload to ensure the safety of industrial lifting installations, overhead cranes, winches and hoists. It is perfectly suitable for implementation on existing lifting systems in order to upgrade in compliance with actual safety standards without heavy modification. It is recommend to be used with a control unit (OMS-370C, OMS-350,OMS-160) easily coupled with a digital display scoreboard with 9 digits or 6digitals(red colour)
Note: Due to continual product development, UTE reserves the right to modify specifications without forewarning.
Features:
- galvanized steel wire (surface preparation, surface treatment:galvanized)
- Reliable and economical
- Stainless steel construction galvanized
- Quick and easy installation
- Easy to mount directly on fixed point of cable (dead point)
- IP67 protection class
- Specially designed for retrofitting in existing crane equipment
- A wide range of associated products: weighing control unit, LED digital display
Wire rope tension sensor : RH-BC |
Rated load |
5T/10T |
Ultimate overload |
200% F.S |
Wire rope diameter |
12-26mm/22-36mm |
Total error |
±0.5%F.S |
Sensitivity |
2.0±0.02%mV/V |
Material |
Alloy Stell |
Excitation voltage |
5-12VDC |
Cable Length |
8/9m |
Input impeance |
380±20Ω |
Creep error |
±0.02% F.S. |
Output impedance |
352±3Ω |
TC SPAN |
±0.02%F.S/10ºC |
Insulation impedance |
≥5000MΩ |
Working temperature |
-30ºC~+70ºC |
Safe overload ratio |
150%F.S |
Protection class |
IP67/IP68 |
Model |
Suitable Rope Dia |
Capacity |
Rated load of each wire rope |
L(cm) |
H (cm) |
B (cm) |
RH-BC-5T |
Dia10~26mm |
5000kg |
10000kg |
160 |
35 |
60 |
RH-BC-10T |
Dia18~36mm |
10000kg |
20000kg |
180 |
32 |
70 |
Instllation&Wiring Diagram
Clampled on the steel cable work with controller to compose the overload load limiter