UC-Ap-C 800kg Digital Output 5-Wire 5melevator Car Floorload Cell with Shock-Absorbing Rubber

• Customization: Available
• Pattern: Rectangle Type
• Transform Type: Resistance Strain
• Model NO.: UC-AP-C
• Output Signal Type: Digital Type
• Feature: Corrosion Resistant
• Production Process: Integration
• Material: Stainless Steel
• IP Rating: IP68
• Certification: CE
• Customized: Customized
• Application: Elevator Cabin Load Cell
• Norminal Load: 800kg
• Cable Length: 5m
• Rated Output: 2.0+-0.02%Mv/V
• Input Resistance: 1030+/-10 Ohm
• Output Resistance: 1000m+/-2 Ohm
• Connection Type: 5 Pin Plug Interface
• Transport Package: Box+Carton, 32PCS/Carton
• Specification: 42.5X40X18.5cm
• Trademark: ANT/SUMMIT
• Origin: Ningbo China
• HS Code: 8431310090
• Production Capacity: 100000PCS/Years

Product Description

Product Description

Rectangle UC-AP-C Rated load 800kg Digital output 5-wire  5m cable elevator car floor compressure load cell with shock-absorbing rubber 

Rated load :800kg-3200kg rectangle under elevator cabin mounting compression load cell
Description:
SUMMIT Elevator Cabin load cell sensors UC-AP/UC-AP-B, UC-AP-C are supplied with their own integral silent-block rubber mounting arrangement  to avoid vibration transmission, and specifically designed for installation below the elevator & lift car. They easily mount under the cab and are extremely accurate, The UC-AP series load cell sensor are designed for use with new passenger lift up to 3200kg load (4pcs) in parallal.

Note: Under cab sensors UC-AP series are not recommended for lift modernization or retrofit.
Features:

• Anodised aluminium construction
• Up to 4x800kg: 3200kg load (4 sensors)
• High accuracy,USB interface or plug
• Individual sensor can be replaced
• Perfect for new installations
• Load cell for installation under elevator cabin.
• Mounted on a silent-block pad that avoids the transfer of vibrations .
• Connected to the unit control of the OMS-560 series and able to install a quantity of 4 cells in parallel, and max up to 8pcs load cell UC-AP
• Adjustable locking screw to adjust the unevenness of the bottom of the car during assembly

Product Parameters

Model	UC-AP	UC-AP-B	UC-AP-C
Rated Load	800kg	800kg	800kg
Rated Output	2.0+-0.02%mv/v	2.0+-0.02%mv/v	2.0+-0.02%mv/v
Total error	+/-0.5% F.S	+/-0.5% F.S	+/-0.5% F.S
Repeatability	+/-0.5% F.S.	+/-0.5% F.S.	+/-0.5% F.S.
Creep 30min	+/-0.05% F.S/30min	+/-0.05% F.S/30min	+/-0.05% F.S/30min
Zero Balance	+/-1% F.S.	+/-1% F.S.	+/-1% F.S.
T C SPAN	+/-0.02% F.S./10 degree Celsius	+/-0.02% F.S./10 degree Celsius	+/-0.02% F.S./10 degree Celsius
Operation temperature range	-30 to 70 degree Celsius	-30 to 70 degree Celsius	-30 to 70 degree Celsius
Input Resistance	1030+/-10 ohm	1030+/-10 ohm	1030+/-10 ohm
Output Resistance	1000M+/-2 ohm	1000M+/-2 ohm	1000M+/-2 ohm
Safe Overload	150% F.S.	150% F.S.	150% F.S.
Ultimate Overload	200% F.S.	200% F.S.	200% F.S.
Construction	Aerometal	Aerometal	Aerometal
Protection Class	IP68	IP68	IP68
Insulation impedance	≥5000Ω	≥5000Ω	≥5000Ω
Cable length	2.5m(black)	2.5m(grey)	5m(grey color)
Connection type	USB interface	Terminal Plug	Terminal plug

Instllation &Wiring Diagram

Related Items

 A wide variety ofInstallation options of load sensors on lift
The following installation options are available for the load sensors:
› RHP-X  strain link Sensor on car frame 
› Multi rope sensor on car after rope clamps ‚
› RH series load sensor on fixed point of individual rope attachment
› DMS sensor on drive frame …